Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

Today we’re going to use Launch X431 V& GODIAG GT100 to diagnose ME17.9.11 ECU for a test. The GODIAG can covert the car OBD2 interface into 16pin that allows to connect single modules and any diagnostic tools. Compatible with Launch X431 V+, X431 PRO5, etc.

 

Connection

  1. Connect GODIAG GT100 & X431 V VCI;
  2. Connect ECU according to wiring diagram, includes PIN5, 18, PIN79, PIN57.
  3. Finally connect the power supply.

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

 

Diagnostic Test

Now we can start diagnosing.

Local Diagnose >> EOBD/OBDII >> OK >> ENTER >> Read I/M Readiness(Mode 01) >> Ready status after DTCS cleared >> Secondary air system monitor >> Ready status after DTCS cleared

 

Here we can read I/M readiness, live data, freeze frame, read & clear fault code, on-board monitoring test, control operation of on-board component/system, read vehicle information and EU OBFCM.

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

 

Read live data(mode 01)

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

 

Read freeze frame data(mode 02)

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

 

Read fault code(mode 03/07/0A)

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

 

Read vehicle info

Launch X431 V + GODIAG GT100 Diagnose ME17.9.11 ECU Test

 

www.x431shop.eu

Visited 6 times, 1 visit(s) today